The Continuous Glucose Monitoring System sensor is a real time, continuous glucose monitoring device. 
The Sensor is located inside the Sensor Applicator.
Follow the instructions to prepare and apply the Sensor on the back of your upper arm. The Sensor has a small, flexible tip that is inserted just under the skin.
The Sensor can be worn for up to 15 days. 
 
Step 1: Select Insertion Area 
Upper arm: the back of the upper arm (Don't insert into the muscles on the outer side of the upper arm.) 
Step 2: Disinfect
Before the insertion, clean the insertion site with an alcohol wipe and let it dry completely. 
Step 3: Unscrew the cover from the sensor applicator and set it aside. 
Step 4: Apply
Align the opening of the applicator with the skin where you want to apply it and press it tightly on the skin. Then press the implantation button of the applicator, wait for a few seconds after hearing the sound of the spring retreating, to make the sensor stick on the skin, and the puncture needle in the applicator will automatically retreat. 
Step 5: Remove applicator
Gently pull the sensor applicator away from the body, and the sensor should now be attached to the skin. 
Step 6: Secure sensor
After installing the sensor, make sure that the sensor is firmly in place. Put the cover back on the sensor applicator. 
 
The Continuous Glucose Monitoring System must be removed prior to:
- Magnetic Resonance Imaging (MRI). 
- Computed tomography (CT) scan, or high-frequency electrical heat (diathermy) treatment. 

Note: Taking higher than the maximum dose of acetaminophen (e.g. > 1 gram every 6 hours in adults) may affect the CGMS readings and make them look higher than they really are. 
 
For more details on Instructions for Use, Indications, Contraindications, and other important user information, refer to USER GUIDE and QUICK GUIDE leaflets available in box.
 
To request free educational session or for troubleshooting/feedback, please Whatsapp or call Aegis hotline on +973 13112298.